B.one B1MS02-ZW-AU Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa B.one B1MS02-ZW-AU. B.one B1MS02-ZW-AU 9 stron.

Dimmer, etc.

Motion sensor can max associate 5 nodes in each group.

Group 1 reports the motion detection and battery level.

Group 2 is assigned to send BASIC SET command.

Grouping

Max Nodes

Identifier

Group 1

0x05

Group 2

0x05

1.2 Basic Command

B.One Motion Sensor will send Basic Set to associated nodes when the PIR is triggered.

1.3Notification command parameters

parameters

Supported Notification Type

Supported Event

a. When the PIR is triggered, send Motion Detection Unknown Location (08);

b. When PIR is released, send Previous Events cleared (00), Parameter 1 for Motion Detection

Unknown Location (08)

c. When there is vibration / movement, send Tampering Product covering removed (03);

d. When there is vibration / movement, send Tampering Product covering removed (03);

e. Notification has a switch to Notification Status, and when it is 0xFF, there will be a Notification

Report. When it is 0, there will be no Notification Report.

Ⅶ.LOW BATTERY MODE

When the device button is released, the command of clearing the shock, the command of clearing

PIR, and all other operation had finished,then the device will enter into the sleep mode which is

the low power mode。

Send Commands

1. Notification Report.

Sensor will send Notification Report to the associated nodes when

Motion Sensor is removed or/and PIR is triggered.

2. Battery Report.

Motion Sensor will send Battery Report when the battery level is low

and the battery report's value is 0xFF.

3. Device Reset Locally Notification.

1. Basic Set.

Motion Sensor will send Basic Set to associated nodes when the PIR

is triggered.

Value

Home Security (07)

Motion Detection Unknown Location (08)

Tampering Product covering removed (03)