B.one B1MS02-ZW-AU Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa B.one B1MS02-ZW-AU. B.one B1MS02-ZW-AU 9 stron.

Parameter No.32 LEVEL OF LOW BATTERY

Define a battery level as the "low battery".

Available settings: 10-50 (10- 50%)

Default setting: 20 (20%)

Parameter size: 1[byte]

Ⅷ.DETECTION AREA

B.One

Motion Sensor's motion detection area is shown below. Actual range of the sensor can be

influenced by environment conditions. Should false motion alarms be reported, check for any

moving objects within the sensor's detection area, such as trees blowing in the wind, cars passing

by, windmills. False motion alarms may be caused by moving masses of air and heat as well. If the

device keeps on reporting false alarms, despite eliminating all of the above-mentioned factors,

install the device in another place.

Ⅸ.RESETTING

Reset procedure clears the motion sensor's memory, including Z-Wave

network controller information. To reset Motion sensor:

1) Power on the device,

2) Press and hold the Z button for more than 20 seconds,

3) If holding time more than 20seconds, the LED indicator will keep on for 2 seconds, which