Cisco PIX 501 Skrócona instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco PIX 501. Cisco PIX 501 20 stron. Data sheet
Również dla Cisco PIX 501: Skrócona instrukcja obsługi (20 strony), Arkusz danych (8 strony), Skrócona instrukcja obsługi (21 strony), Skrócona instrukcja obsługi (18 strony)

Configuring the PIX 501

The PIX 501 comes with a factory default configuration that meets the needs of most broadband

networking environments. The factory default configuration on the PIX 501 protects your inside

network from any unsolicited traffic. It is configured to use DHCP on the outside interface to acquire its

IP address. A default DHCP server address pool is included for hosts on the inside interface.

PDM contains a Startup Wizard that lets you easily change settings to suit your needs.

Instances in which it might be necessary to change or make additional changes to the default

configuration include the following:

• To create administrative and Telnet passwords

We highly recommend that you change the administrative and Telnet passwords from their

Note

default settings to secure the administration of your PIX Firewall.

• To configure Point-to-Point Protocol over Ethernet (PPPoE) or a static IP address for an outside

interface

• To configure VPN and Auto Update features

The PIX 501 contains an integrated configuration

utility called Cisco PIX Device Manager (PDM). PDM

is a web browser-based configuration tool designed to

help you set up, configure, and monitor the

PIX Firewall. PDM is preinstalled on the PIX 501.

To access PDM, make sure JavaScript and Java are

enabled in your web browser. For best performance,

we recommend that you use Microsoft Internet

Explorer 5.5 or a higher release. Refer to the Cisco

PIX Device Manager Installation Guide for more

information on the operating system and Web

browser environments supported by PDM.