Cisco PIX 525 Podręcznik użytkownika - Strona 28

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy Cisco PIX 525. Cisco PIX 525 30 stron. Security appliance
Również dla Cisco PIX 525: Arkusz danych (13 strony)

Drukuj stronę

Installing a DC Power Supply

Figure 6-29 Attaching a Grounding Lug to the PIX Security Appliance

PIX security appliance

To rack

ground

Ensure that power is removed from the DC circuit. To ensure that all power is OFF, locate the circuit

Step 15

breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position,

and tape the switch handle of the circuit breaker in the OFF position.

Strip the ends of the wires for insertion into the power connect lugs on the PIX 525.

Step 16

Refer to

Step 17

screw on the connector. Using the same method as for the ground wire, connect the negative wire and

then the positive wire.

Figure 6-30 Attaching DC Power Cables

Cisco PIX Security Appliance Hardware Installation Guide

6-28

Rear of

–

10-32 nuts

Figure 6-30

and insert the ground wire into the connector for the earth ground and tighten the

Grounding studs

on PIX DC model

2-hole copper

standard barrel

grounding lug

–

Chapter 6

PIX 525

78-15170-02