Cisco UCS X10c Instrukcja instalacji i obsługi - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt sieciowy Cisco UCS X10c. Cisco UCS X10c 38 stron. Front mezzanine gpu module
Drukuj stronę
Servicing the GPU Module
Step 2
Place the drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in another compute node.
Step 3
Install a drive blanking panel to maintain proper airflow and keep dust out of the drive bay if it will remain empty.
What to do next
Cover the empty drive bay. Choose the appropriate option:
•
•
Installing a Drive
Caution
To install a U.2 NVMe drive, follow this procedure:
Step 1
Place the drive ejector into the open position by pushing the release button.
Step 2
Gently slide the drive into the empty drive bay until it seats into place.
Step 3
Push the drive ejector into the closed position.
You should feel the ejector click into place when it is in the closed position.
Installing a Drive, on page 23
Installing a Drive Blank, on page 25
For hot installation of drives, after the original drive is removed, you must wait for 20 seconds before installing
a drive. Failure to allow this 20-second wait period causes the management software to display incorrect drive
inventory information. If incorrect drive information is displayed, remove the affected drive(s), wait for 20
seconds, then reinstall them.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
Installing a Drive
23