Cisco UCS X10c 설치 및 서비스 매뉴얼 - 페이지 31

{카테고리_이름} Cisco UCS X10c에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS X10c 38 페이지. Front mezzanine gpu module

Servicing the GPU Module

Step 2

Place the drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in another compute node.

Step 3

Install a drive blanking panel to maintain proper airflow and keep dust out of the drive bay if it will remain empty.

What to do next

Cover the empty drive bay. Choose the appropriate option:

•

Installing a Drive

Caution

To install a U.2 NVMe drive, follow this procedure:

Step 1

Place the drive ejector into the open position by pushing the release button.

Step 2

Gently slide the drive into the empty drive bay until it seats into place.

Step 3

Push the drive ejector into the closed position.

You should feel the ejector click into place when it is in the closed position.

Installing a Drive, on page 23

Installing a Drive Blank, on page 25

For hot installation of drives, after the original drive is removed, you must wait for 20 seconds before installing

a drive. Failure to allow this 20-second wait period causes the management software to display incorrect drive

inventory information. If incorrect drive information is displayed, remove the affected drive(s), wait for 20

seconds, then reinstall them.

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

Installing a Drive