Cisco 7513 Series Instrukcja wymiany - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Serwer Cisco 7513 Series. Cisco 7513 Series 19 stron. Chassis replacement
Również dla Cisco 7513 Series: Skrócona instrukcja obsługi (44 strony), Instrukcja wymiany (26 strony), Arkusz danych (11 strony), Podręcznik (30 strony), Utrzymanie (20 strony), Instrukcja wymiany (22 strony)

Removing Processor Modules

Step 6

Step 7

Figure 3

6 Cisco 7513 Card Cage and Backplane Assembly Replacement Instructions

Place your thumbs on the ejector levers on both ends of the processor module (see

Figure 3c) and simultaneously pull them both outward to release the processor module

from the backplane connector.

Grasp the processor module handle with one hand and place your other hand under the

carrier to support it. Pull the processor module straight out of the slot keeping it at a

90-degree orientation to the backplane. (See Figure 5 on page 8.)

Ejector Levers and Captive Installation Screws

Processor

module

carrier guide

Captive

installation

screw

STOP!

on contact

Bottom ejector lever

Processor module

slot