B2 Mono Quattro Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz B2 Mono Quattro. B2 Mono Quattro 10 stron. High performance amplifiers
Drukuj stronę3. CONTROL & CONNECTION
Mono
3-1.
CONTROL & CONNECTION
INPUT
Connect preamp signal cables from
the headunit to RCA Input of
OUTPUT
Output RCA for signal routing to another amplifier.
POWER & PROTECTION INDICATOR
Power BLUE, Green-lit shows correct operation
Protect LED, RED-lit shows general malfunction,
faulty connection or thermal protection
GAIN ( 6V ~ 0.2V )
Matching the output voltage of the headunit's
Mono
RCA line-outs to
SUBSONIC FILTER ( 10Hz ~ 50Hz @ 24dB/Oct )
Adjusts the subsonic cut off point to eliminate low
frequencies.
Quattro
3-2.
CONTROL & CONNECTION
INPUT
Connect preamp signal cables from
the headunit to RCA Input of
OUTPUT
Output RCA for signal routing to another amplifier.
POWER & PROTECTION INDICATOR
Power BLUE, Green-lit shows correct operation
Protect LED, RED-lit shows general malfunction,
faulty connection or thermal protection
INPUT LEVEL
INPUT LEVEL selects Low/High level input from headunit
if you set it to Low, then Rca Jack receives Low input
If you set it to high, then Rca jack receives High input.
Mono
.
input section.
Quattro.
BASS BOOST
Variable bass boost from 0-9 dB @ 45 Hz
REMOTE LEVEL CONTROL PORT
Connection of external level control.
LOW PASS FILTER ( 35Hz ~ 250Hz @ 24dB/Oct )
Adjusts the cut off point for the low pass filter.
PHASE CONTROL
Variable phase adjustment from 0-180 degrees.
OUTPUT MASTER / INPUT SLAVE
For daisy chain connection of 2
down to 2 ohms.
GAIN ( 6V ~ 0.2V )
Matching the output voltage of the headunit's
Quattro
RCA line-outs to
SUBSONIC FILTER ( 10Hz ~ 100Hz @ 12dB/Oct )
Adjusts the subsonic cut off point to eliminate low
frequencies.
BASS BOOST
Variable bass boost from 0-18 dB @ 45 Hz
Mono
amplifiers
input section.
2