Cisco ONS 15454 Instalacja - Strona 12

Przeglądaj online lub pobierz pdf Instalacja dla Serwer Cisco ONS 15454. Cisco ONS 15454 32 stron. Four-shelf and zero-shelf bay assembly
Również dla Cisco ONS 15454: Instrukcja instalacji (22 strony), Instalacja (32 strony), Rozpakowywanie i instalacja (42 strony), Rozpakowywanie i instalacja (40 strony)

NTP-A119 Install the Alarm Expansion Panel

Figure 1-1

Step 4

Continue with the

to install an alarm expansion panel (AEP). If not, continue with the

Timing, LAN, and Craft Pin Connections" procedure on page

Stop. You have completed this procedure.

NTP-A119 Install the Alarm Expansion Panel

Purpose

Tools/Equipment

Prerequisite Procedures

Cisco ONS 15454 Procedure Guide, R5.0

1-12

Installing the Fan-Tray Assembly

FA N

FA IL

C R

M A

M IN

LCD

Fan tray

assembly

"NTP-A119 Install the Alarm Expansion Panel" procedure on page 1-12

This procedure installs an alarm expansion panel (AEP) onto the

15454-SA-ANSI or 15454-SA-HD shelf backplane. The AEP provides

alarm contacts in addition to the 16 provided by the AIC-I card. Typically,

the AEP is preinstalled when ordered with the ONS 15454; however, the

AEP can be ordered separately. The AIC-I card must be installed before

you can provision the alarm contacts enabled by the AEP.

#2 Phillips screwdriver

Medium slot-head screwdriver

Small slot-head screwdriver

Wire wrapper

6-pair #29 AWG double-shielded cable

Standoffs (4)

DLP-A10 Remove the Lower Backplane Cover, page 17-10

Chapter 1

Install the Shelf and Backplane Cable

"NTP-A8 Attach Wires to Alarm,

1-15.

if you plan

March 2005