Cisco Secure Network Server 3600 Series Instrukcja instalacji sprzętu - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Serwer Cisco Secure Network Server 3600 Series. Cisco Secure Network Server 3600 Series 38 stron. Appliance

Drukuj stronę

1. Cisco Sns 3600 Series Appliance Hardware Specifications

Reversing the Cable Management Arm (Optional)

Figure 10: Attaching the CMA to the Rear Ends of the Slide Rails

CMA tab on arm farthest from appliance

attaches to end of stationary outer slide rail.

CMA tab on arm closest to the appliance

attaches to end of inner slide rail attached to

appliance.

Step 2

Slide the CMA tab that is closest to the appliance over the end of the inner rail that is attached to the appliance. Slide the

tab over the end of the rail until it clicks and locks.

Step 3

Pull out the width-adjustment slider that is at the opposite end of the CMA assembly until it matches the width of your

rack.

Step 4

Slide the CMA tab that is at the end of the width-adjustment slider onto the end of the stationary slide rail that is attached

to the rack post. Slide the tab over the end of the rail until it clicks and locks.

Step 5

Open the hinged flap at the top of each plastic cable guide and route your cables through the cable guides as desired.

Reversing the Cable Management Arm (Optional)

Step 1

Rotate the entire Cable Management Arm (CMA) assembly 180 degrees, left-to-right. The plastic cable guides must

remain pointing upward.

Step 2

Flip the tabs at the ends of the CMA arms so that they point toward the rear of the appliance.

Cisco Secure Network Server 3600 Series Appliance Hardware Installation Guide

CMA tab on width-adjustment slider attaches

to end of stationary outer slide rail.

Rear of appliance

Installing the Appliance