Cisco SNS-3495 series Instrukcja instalacji - Strona 25
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco SNS-3495 series. Cisco SNS-3495 series 36 stron. Sns-3400 series
Również dla Cisco SNS-3495 series: Instrukcja instalacji (19 strony), Instrukcja rozwiązywania problemów (8 strony)
Drukuj stronę
Install the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances
c) Release the clip marked "PULL" to lock the securing latch in the open position.
Figure 4: Front Securing Latch
1
Clip marked "PULL" on rear of assembly
2
Front mounting pegs
Step 2
Install the slide rails onto the rack:
a) Position a slide-rail assembly inside the two left-side rack posts (see the following figure).
Use the "FRONT" and "REAR" markings on the slide-rail assembly to orient the assembly correctly with the front
and rear rack posts.
b) Position the front mounting pegs so that they enter the desired front rack-post holes from the front.
3
Spring-loaded securing latch on front of assembly
Cisco SNS-3400 Series Appliance Hardware Installation Guide
Install the Side Rails
21