Cisco UCS B200 M4 Uwaga dotycząca instalacji i obsługi - Strona 20

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Serwer Cisco UCS B200 M4. Cisco UCS B200 M4 30 stron. For e5-2600 v4 series cpus
Również dla Cisco UCS B200 M4: Uwaga dotycząca instalacji i obsługi (46 strony), Instrukcja aktualizacji (9 strony), Instrukcja serwisowa (24 strony)

Procedure

Step 1

Open both DIMM connector latches.

Figure 15: Installing DIMMs in the Blade Server

Step 2

Press the DIMM into its slot evenly on both ends until it clicks into place.

DIMMs are keyed, if a gentle force is not sufficient, make sure the notch on the DIMM is correctly aligned.

Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage the DIMM,

Note

the slot, or both.

Step 3

Press the DIMM connector latches inward slightly to seat them fully.

Supported DIMMs

The DIMMs supported in this blade server are constantly being updated. A list of currently supported and available DIMMs is in the

specification sheets at:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

Cisco does not support third-party memory DIMMs, and in some cases their use may irreparably damage the server and require an

RMA and down time.