Cisco ATA 186 Instrukcje dotyczące instalacji

Przeglądaj online lub pobierz pdf Instrukcje dotyczące instalacji dla Gateway Cisco ATA 186. Cisco ATA 186 6 stron. Analog telephone adaptor
Również dla Cisco ATA 186: Konfiguracja (28 strony), Arkusz danych (7 strony), Przegląd (11 strony), Podręcznik przeglądowy (11 strony), Podręcznik konfiguracji (8 strony), Podręcznik użytkownika (12 strony), Instrukcja instalacji i konfiguracji (13 strony), Konfiguracja (6 strony)

Installing the Cisco ATA

This section provides instructions for installing the Cisco ATA 186 and Cisco ATA 188. Before you

perform the installation, be sure you have met the following prerequisites:

•

This section contains the following topics:

•

Note

The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the

Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated.

Safety Recommendations

To ensure general safety, follow these guidelines:

•

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.

Read the installation instructions before you connect the system to its power source.

Warning

OL-4804-01

Planned the network and Cisco ATA configuration.

Installed the Ethernet connection.

Installed and configured the other network devices.

Safety Recommendations, page 2-1

What the Cisco ATA Package Includes, page 2-2

What You Need, page 2-2

Installation Procedure, page 2-3

Power-Down Procedure, page 2-5

Do not get this product wet or pour liquids into this device.

Do not open or disassemble this product.

Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Use only the power supply that comes with the Cisco ATA.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)

C H A P T E R

2-1