Cisco ATA 186 설치 지침

{카테고리_이름} Cisco ATA 186에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 186 6 페이지. Analog telephone adaptor
Cisco ATA 186에 대해서도 마찬가지입니다: 구성 (28 페이지), 데이터시트 (7 페이지), 개요 (11 페이지), 개요 매뉴얼 (11 페이지), 구성 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 설치 및 구성 매뉴얼 (13 페이지), 구성 (6 페이지)

페이지 인쇄

Installing the Cisco ATA

This section provides instructions for installing the Cisco ATA 186 and Cisco ATA 188. Before you

perform the installation, be sure you have met the following prerequisites:

•

This section contains the following topics:

•

Note

The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the

Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated.

Safety Recommendations

To ensure general safety, follow these guidelines:

•

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.

Read the installation instructions before you connect the system to its power source.

Warning

OL-4804-01

Planned the network and Cisco ATA configuration.

Installed the Ethernet connection.

Installed and configured the other network devices.

Safety Recommendations, page 2-1

What the Cisco ATA Package Includes, page 2-2

What You Need, page 2-2

Installation Procedure, page 2-3

Power-Down Procedure, page 2-5

Do not get this product wet or pour liquids into this device.

Do not open or disassemble this product.

Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Use only the power supply that comes with the Cisco ATA.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)

C H A P T E R

2-1