Cisco ATA 186 개요
{카테고리_이름} Cisco ATA 186에 대한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 186 11 페이지. Analog telephone adaptor
Cisco ATA 186에 대해서도 마찬가지입니다: 구성 (28 페이지), 데이터시트 (7 페이지), 개요 매뉴얼 (11 페이지), 구성 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 설치 및 구성 매뉴얼 (13 페이지), 설치 지침 (6 페이지), 구성 (6 페이지)
페이지 인쇄
Cisco Analog Telephone Adaptor Overview
This section describes the hardware and software features of the Cisco Analog Telephone Adaptor
(Cisco ATA) and includes a brief overview of the Media Gateway Control Protocol (MGCP).
Cisco ATA analog telephone adaptors are handset-to-Ethernet adaptors which allow regular analog
telephones to operate on IP-based telephony networks. Cisco ATAs support two voice ports, each with
an independent telephone number. The Cisco ATA 188 also has an RJ-45 10/100 BASE-T data port.
This section covers the following topics:
•
Overview of Media Gateway Control Protocol, page 1-2
Hardware Overview, page 1-3
•
•
Software Features, page 1-5
Installation and Configuration Overview, page 1-9
•
Figure 1-1
The Cisco ATA, which operates with Cisco voice-packet gateways, makes use of broadband pipes that
are deployed by means of a digital subscriber line (DSL), fixed wireless cable modem, and other Ethernet
connections.
The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.
Note
OL-4803-01
Cisco ATA Analog Telephone Adaptor
C IS C O A
T A 1 8 6
A N A L O G
T E L E PH
O N E A D
A PT O R
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for MGCP (version 3.0)
C H A P T E R
1
1-1