Cisco TelePresence ISDN GW MSE 8321 Pierwsze kroki - Strona 11
Przeglądaj online lub pobierz pdf Pierwsze kroki dla Gateway Cisco TelePresence ISDN GW MSE 8321. Cisco TelePresence ISDN GW MSE 8321 17 stron.
Również dla Cisco TelePresence ISDN GW MSE 8321: Podręcznik dla początkujących (15 strony)
Drukuj stronę
Configuring the ISDN gateway
Step one: Log in to the ISDN gateway
All administration of the ISDN gateway is performed via the web interface.
To log in to the ISDN gateway:
1
Log in to the Supervisor's web interface.
2
Go to
Hardware > Blades
3
Click
Log in
information page
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, click
information
required user information.
Step two: Allocate port licences
Port licenses must be allocated to the ISDN gateway from the Supervisor's
page. Refer to the online help for assistance.
licenses
Step three: Set up the ISDN interfaces
1
In the web interface, go to
2
Select the
ISDN interface type
used in the UK and mainland Europe, T1 (USA and Canada) in North America,
and T1(Japan) in Japan.
3
Complete the other settings as required by your network, referring to the online
help for further information.
4
Click
Apply changes
5
Restart the ISDN gateway (this is only necessary if you changed the ISDN
configuration). To do this:
i
Go to
Settings > Shutdown
ii
Confirm that you want to shut down the ISDN gateway.
iii Click
Restart ISDN GW
6
When the ISDN gateway has restarted, log in to the web interface again, and go
to
Settings > ISDN ports
and click the IP address of the ISDN gateway.
and enter the user name
is displayed.
page or go to
Settings > ISDN
to save any changes you have made to the configuration.
.
.
with no password. The
admin
Change password
, click the
Users
.
to match that of your installation; E1 is typically
, and click
Shut down ISDN GW
Configuring the ISDN gateway
on the
link, and provide the
admin
.
Login
Login
Port
11