Cisco VG400 series Instrukcja konfiguracji oprogramowania - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji oprogramowania dla Gateway Cisco VG400 series. Cisco VG400 series 22 stron. Voice gateway
Również dla Cisco VG400 series: Instrukcja instalacji sprzętu (40 strony), Instalacja (13 strony)

Cisco VG400 series Instrukcja konfiguracji oprogramowania
Understanding Interface Numbering and Cisco
IOS Software Basics
This chapter provides an overview of interface numbering in the Cisco VG400 Voice Gateway (VG). This
chapter also describes how to use the Cisco IOS software commands.
This chapter consists of the following major topics:

Understanding Cisco IOS Software Basics

This section describes what you need to know about the Cisco IOS software before you configure the router
using the CLI. Understanding these concepts will save time as you begin to use the commands. If you have
never used Cisco IOS software or need a refresher, take a few minutes to read this chapter before you proceed
to the next chapter.
If you are already familiar with Cisco IOS software, proceed to the
on page 5
This chapter includes the following:

Getting Help

Use the question mark (?) and arrow keys to help you enter commands:
• For a list of available commands, enter a question mark:
Router> ?
• To complete a command, enter a few known characters followed by a question mark (with no space):
Router> s?
• For a list of command variables, enter the command followed by a space and a question mark:
Router> show ?
Understanding Cisco IOS Software Basics, on page 1
Upgrading to a New Cisco IOS Release, on page 3
Where to Go Next, on page 3
section.
C H A P T E R
Configuring the Host Name and Password,
Cisco VG400 Voice Gateway Software Configuration Guide
1
1