Cisco VG400 series 소프트웨어 구성 매뉴얼 - 페이지 7

{카테고리_이름} Cisco VG400 series에 대한 소프트웨어 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG400 series 22 페이지. Voice gateway
Cisco VG400 series에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (40 페이지), 설치 (13 페이지)

페이지 인쇄

Understanding Interface Numbering and Cisco

IOS Software Basics

This chapter provides an overview of interface numbering in the Cisco VG400 Voice Gateway (VG). This

chapter also describes how to use the Cisco IOS software commands.

This chapter consists of the following major topics:

•

Understanding Cisco IOS Software Basics

This section describes what you need to know about the Cisco IOS software before you configure the router

using the CLI. Understanding these concepts will save time as you begin to use the commands. If you have

never used Cisco IOS software or need a refresher, take a few minutes to read this chapter before you proceed

to the next chapter.

If you are already familiar with Cisco IOS software, proceed to the

on page 5

This chapter includes the following:

Getting Help

Use the question mark (?) and arrow keys to help you enter commands:

• For a list of available commands, enter a question mark:

Router> ?

• To complete a command, enter a few known characters followed by a question mark (with no space):

Router> s?

• For a list of command variables, enter the command followed by a space and a question mark:

Router> show ?

Understanding Cisco IOS Software Basics, on page 1

Upgrading to a New Cisco IOS Release, on page 3

Where to Go Next, on page 3

section.

C H A P T E R

Configuring the Host Name and Password,

Cisco VG400 Voice Gateway Software Configuration Guide