Epson RX680 - Stylus Photo Color Inkjet Skrócona instrukcja obsługi - Strona 40

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Skaner Epson RX680 - Stylus Photo Color Inkjet. Epson RX680 - Stylus Photo Color Inkjet 48 stron. Ultra hi-definition photo all-in-one
Również dla Epson RX680 - Stylus Photo Color Inkjet: Arkusz specyfikacji (2 strony), Streszczenie techniczne (11 strony), Podręcznik Start Here (8 strony), Aktualizacja (1 strony), Ważne informacje (3 strony), Podręcznik Start Here (8 strony)

3. If you see paper jammed in the lower rear area or in the auto duplexer,

slowly pull it out.

■

If you see a message that paper is jammed in the bottom of the all-in-one, see

your on-screen User's Guide for instructions on clearing the jam.

Print Quality Problems

■

Make sure the document is placed flat against the document table glass and

the all-in-one is not tilted or placed on an uneven surface.

■

In the rear sheet feeder, load the paper printable side face-up. In the front

paper cassette, load paper with the printable side face-down.

■

Make sure your paper isn't damp or curled.

■

Use a support sheet with special paper or load your paper one sheet at a time.

Remove sheets from the output tray so not too many collect at a time.

■

Make sure the type of paper you loaded matches the paper size and type

settings on the control panel (see page 13) and in your software (see page 28).

■

For the best print quality, use Epson special paper (see page 10) and genuine

Epson ink cartridges (see page 35).

■

If you notice light or dark bands across your printouts or they are too faint,

you may need to clean the print head to unclog the nozzles. Run a nozzle

check (see page 31) to see if the print head needs cleaning.

■

Clean the print head (see page 32).

■

If you notice jagged vertical lines, you may need to align the print head. See

the on-screen User's Guide for instructions.

■

The ink cartridges may be low on ink (see page 35 for instructions on

replacing an ink cartridge).

■

If a dotted line appears in the image, clean the scanner glass with a soft, dry,

lint-free cloth (paper towels are not recommended), or use a small amount of

glass cleaner on a soft cloth. Do not spray glass cleaner directly on the glass.

Solving Problems