Epson FX-880+ Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria do drukarek Epson FX-880+. Epson FX-880+ 33 stron. Epson serial impact dot matrix printers
Również dla Epson FX-880+: Instrukcja konfiguracji (33 strony), Broszura i specyfikacje (24 strony), Podręcznik (18 strony), Specyfikacje (2 strony), Przeczytaj to najpierw (2 strony), Podręcznik referencyjny (34 strony)

Continuous Paper with the Front Push Tractor

Follow these steps to load paper using the

front push tractor:

1. Make sure the printer is turned off.

2. Open the front cover and the flap. Make

sure the tractor is installed in the front

push position.

3. Set the paper release lever to the front

push tractor position. Also set the

paper-thickness lever (located under the

printer cover) to the proper position for

your paper's thickness. See

"Paper-Thickness Setting" for

instructions.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

4. Release the left and right sprockets by

pushing the blue sprocket lock levers

backward.

5. Slide the left sprocket approximately 12

mm (0.5 inch) from the far left position

and pull the blue lever forward to lock it

in place. Then slide the right sprocket to

match the width of your paper, but do

not lock it. Move the center support

midway between the two sprocket units.

* approx. 12 mm (0.5 inch)

Continuous Paper with the Front Push Tractor (1/2)