Epson FX-880+ Przeczytaj to najpierw

Przeglądaj online lub pobierz pdf Przeczytaj to najpierw dla Akcesoria do drukarek Epson FX-880+. Epson FX-880+ 2 stron. Epson serial impact dot matrix printers
Również dla Epson FX-880+: Instrukcja konfiguracji (33 strony), Broszura i specyfikacje (24 strony), Podręcznik (18 strony), Specyfikacje (2 strony), Podręcznik referencyjny (34 strony), Skrócona instrukcja obsługi (33 strony)

EPSON FX-880+ in Okidata Mode

If you have the EPSON

Okidata

Microline

different mode. In Okidata mode, the printer emulates Okidata

functions, and the following additional settings can be selected in

default setting mode:

Feature

Software emulation

Auto tear off wait time

Bottom margin

Line spacing (lines per inch)

Paper out override

The default settings (shown in bold) are consistent with Okidata

Microline 320 Turbo factory settings.

Note: Because the ML 320T does not have a built-in USB interface,

the FX-880+ does not support the USB interface in Okidata mode.

If you want to use your printer in Okidata mode, do not install the

Windows

driver that came with your FX-880+. If you have been

using an Okidata driver, you can continue to use it with your FX-880+

in Okidata mode.

If you have been using an Okidata printer, you may want to print out

its default settings for reference before changing modes on the

FX-880+. To do this on the ML 320T, press SHIFT + SEL to enter

Menu mode, and then press PRINT.

Read This First

If You Want to Use Your

FX-880+, you can make it work like the

320 Turbo by turning the printer on in a

Printer settings in Okidata mode

IBM

PPDS, EPSON ESC/P

0.5 second, 1 second, 2 seconds, Others

4.2 mm, 20 mm, 22 mm, 24 mm, Others

6 LPI, 8 LPI

Off (No), On (Yes)

, OKI ML 320T