Epson FX-880+ Сначала прочитайте это

Просмотреть онлайн или скачать pdf Сначала прочитайте это для Аксессуары для принтеров Epson FX-880+. Epson FX-880+ 2 страницы. Epson serial impact dot matrix printers
Также для Epson FX-880+: Руководство по настройке (33 страниц), Брошюра и технические характеристики (24 страниц), Руководство (18 страниц), Технические характеристики (2 страниц), Справочное руководство (34 страниц), Краткое руководство (33 страниц)

EPSON FX-880+ in Okidata Mode

If you have the EPSON

Okidata

Microline

different mode. In Okidata mode, the printer emulates Okidata

functions, and the following additional settings can be selected in

default setting mode:

Feature

Software emulation

Auto tear off wait time

Bottom margin

Line spacing (lines per inch)

Paper out override

The default settings (shown in bold) are consistent with Okidata

Microline 320 Turbo factory settings.

Note: Because the ML 320T does not have a built-in USB interface,

the FX-880+ does not support the USB interface in Okidata mode.

If you want to use your printer in Okidata mode, do not install the

Windows

driver that came with your FX-880+. If you have been

using an Okidata driver, you can continue to use it with your FX-880+

in Okidata mode.

If you have been using an Okidata printer, you may want to print out

its default settings for reference before changing modes on the

FX-880+. To do this on the ML 320T, press SHIFT + SEL to enter

Menu mode, and then press PRINT.

Read This First

If You Want to Use Your

FX-880+, you can make it work like the

320 Turbo by turning the printer on in a

Printer settings in Okidata mode

IBM

PPDS, EPSON ESC/P

0.5 second, 1 second, 2 seconds, Others

4.2 mm, 20 mm, 22 mm, 24 mm, Others

6 LPI, 8 LPI

Off (No), On (Yes)

, OKI ML 320T