Epson FX-880+ 먼저 읽어보기
{카테고리_이름} Epson FX-880+에 대한 먼저 읽어보기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-880+ 2 페이지. Epson serial impact dot matrix printers
Epson FX-880+에 대해서도 마찬가지입니다: 설정 매뉴얼 (33 페이지), 브로셔 및 사양 (24 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 참조 매뉴얼 (34 페이지), 빠른 매뉴얼 (33 페이지)
페이지 인쇄
EPSON FX-880+ in Okidata Mode
If you have the EPSON
®
Okidata
Microline
different mode. In Okidata mode, the printer emulates Okidata
functions, and the following additional settings can be selected in
default setting mode:
Feature
Software emulation
Auto tear off wait time
Bottom margin
Line spacing (lines per inch)
Paper out override
The default settings (shown in bold) are consistent with Okidata
Microline 320 Turbo factory settings.
Note: Because the ML 320T does not have a built-in USB interface,
the FX-880+ does not support the USB interface in Okidata mode.
If you want to use your printer in Okidata mode, do not install the
®
Windows
driver that came with your FX-880+. If you have been
using an Okidata driver, you can continue to use it with your FX-880+
in Okidata mode.
If you have been using an Okidata printer, you may want to print out
its default settings for reference before changing modes on the
FX-880+. To do this on the ML 320T, press SHIFT + SEL to enter
Menu mode, and then press PRINT.
Read This First
If You Want to Use Your
®
FX-880+, you can make it work like the
®
320 Turbo by turning the printer on in a
Printer settings in Okidata mode
®
IBM
PPDS, EPSON ESC/P
0.5 second, 1 second, 2 seconds, Others
4.2 mm, 20 mm, 22 mm, 24 mm, Others
6 LPI, 8 LPI
Off (No), On (Yes)
1
®
, OKI ML 320T