TomTom LINK 510 Instrukcja instalacji - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla GPS TomTom LINK 510. TomTom LINK 510 35 stron. Vehicle tracking device
Również dla TomTom LINK 510: Podręcznik użytkownika (37 strony), Instrukcja instalacji (16 strony)
Drukuj stronę
13.
Resetting the LINK 510
If your LINK 510 does not operate properly or signals a system error (see Diagnostics on
Reset-
ting the
LINK
510
page 22) you may need to restart or reset the unit. Only restart or reset the LINK 510 after
you have made sure you have carried out all previously described steps without success.
Restarting your LINK
To restart your LINK 510, press the reset button with a thin pointed object until it clicks and
keep it pressed down for 1 to 2 seconds. The LINK 510 restarts immediately after releasing
the button.
If restarting the device does not succeed remove the power cable from the LINK 510. Then
plug it into the power cable connector again.
Resetting your LINK to factory settings
To reset the LINK 510 to factory settings, press the reset button with a thin pointed object
until it clicks and keep it pressed for 4 to 8 seconds. The LINK 510 reboots immediately
after releasing the reset button.
Important: All information stored on the LINK 510 is deleted during a factory reset.
If resetting the device does not succeed, do the following:
1. Remove the power cable from the device.
2. Press the reset button with a thin pointed object until it clicks and keep it pressed.
3. Insert the power cable while keeping the reset button pressed for 4 to 8 seconds.
You can count the seconds with the help of the flashing of the green LED, that flashes
once per second.
The LINK 510 reboots immediately after releasing the reset button.
24