Motorola GP240 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Dwukierunkowe radio Motorola GP240. Motorola GP240 46 stron. Professional radio, power distribution and controller
Również dla Motorola GP240: Informacje o usłudze (32 strony), Informacje o usłudze (30 strony), Podręcznik użytkownika (46 strony), Informacje o usłudze (30 strony)

Drukuj stronę

Symbol

Name and Description

Programming/Viewing Mode

Indicates when the radio is in the programming

or viewing mode;

ON = IN VIEWING MODE

BLINKING = IN PROGRAMMING MODE.

Battery Level Indicator

Shows the remaining charge in your battery,

based on how many bars are displayed.

Flashing, indicates flat battery.

Alert Tone Indications

Your radio generates a number of audible tones to

indicate radio operating conditions:

•

Low Battery – A low-battery condition is indi-

cated by a high-pitched, "chirp-chirp" when the

PTT switch is released following a transmission.

•

Successful Power-Up – A short, medium-pitched

tone when the radio is first turned on indicates

that the radio has passed its power-up self test

and is ready for use.

•

Unsuccessful Power-Up – A short, low-pitched

tone when the radio is first turned on indicates

that the radio has failed its power-up self test

and is not ready for use. Contact your service

representative for service.

•

Transmit on Receive-Only Mode – If you press

the PTT switch while tuned to a "receive-only"

mode, you will hear a continuous, low-pitched

alert tone, indicating that no transmission is

possible on this mode. This tone will continue

until the PTT switch is released.

•

Transmit Inhibit on Busy Mode – If you press the

PTT switch while the mode is busy, you will hear

a continuous, low-pitched alert tone, indicating

that no transmission is possible on this mode.

This tone will continue until the PTT switch is

released.

•

Transmit Inhibit on Flat Battery – If you press the

PTT while the battery is flat, you will hear a con-

tinuous, low pitched alert tone, indicating that

transmission is impossible.

•

Invalid Mode – A continuous, low-pitched tone is

heard when an invalid or unprogrammed

operation is attempted on the radio.

•

Valid (Good) Key Press – A short, medium-

pitched tone when a keypad key is pressed

indicates that the key press was accepted.

•

Invalid (Bad) Key Press – A short, low-pitched

tone when a keypad key is pressed indicates

that the key press was rejected.

•

Failsoft (Trunked Systems Only) – A faint "beep-

ing" tone every ten seconds indicates that the

radio is operating in the failsoft mode.

English