Motorola GP240 Manual do utilizador - Página 13
Procurar online ou descarregar pdf Manual do utilizador para Rádio bidirecional Motorola GP240. Motorola GP240 46 páginas. Professional radio, power distribution and controller
Também para Motorola GP240: Informações sobre o serviço (32 páginas), Informações sobre o serviço (30 páginas), Manual do utilizador (46 páginas), Informações sobre o serviço (30 páginas)
Imprimir página
Symbol
Name and Description
Programming/Viewing Mode
Indicates when the radio is in the programming
K
or viewing mode;
ON = IN VIEWING MODE
BLINKING = IN PROGRAMMING MODE.
Battery Level Indicator
Shows the remaining charge in your battery,
P
based on how many bars are displayed.
Flashing, indicates flat battery.
Alert Tone Indications
Your radio generates a number of audible tones to
indicate radio operating conditions:
•
Low Battery – A low-battery condition is indi-
cated by a high-pitched, "chirp-chirp" when the
PTT switch is released following a transmission.
•
Successful Power-Up – A short, medium-pitched
tone when the radio is first turned on indicates
that the radio has passed its power-up self test
and is ready for use.
•
Unsuccessful Power-Up – A short, low-pitched
tone when the radio is first turned on indicates
that the radio has failed its power-up self test
and is not ready for use. Contact your service
representative for service.
•
Transmit on Receive-Only Mode – If you press
the PTT switch while tuned to a "receive-only"
mode, you will hear a continuous, low-pitched
alert tone, indicating that no transmission is
possible on this mode. This tone will continue
until the PTT switch is released.
•
Transmit Inhibit on Busy Mode – If you press the
PTT switch while the mode is busy, you will hear
a continuous, low-pitched alert tone, indicating
that no transmission is possible on this mode.
This tone will continue until the PTT switch is
released.
•
Transmit Inhibit on Flat Battery – If you press the
PTT while the battery is flat, you will hear a con-
tinuous, low pitched alert tone, indicating that
transmission is impossible.
•
Invalid Mode – A continuous, low-pitched tone is
heard when an invalid or unprogrammed
operation is attempted on the radio.
•
Valid (Good) Key Press – A short, medium-
pitched tone when a keypad key is pressed
indicates that the key press was accepted.
•
Invalid (Bad) Key Press – A short, low-pitched
tone when a keypad key is pressed indicates
that the key press was rejected.
•
Failsoft (Trunked Systems Only) – A faint "beep-
ing" tone every ten seconds indicates that the
radio is operating in the failsoft mode.
English
9