Motorola E398 series Instrukcja serwisowa - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Telefon bezprzewodowy Motorola E398 series. Motorola E398 series 44 stron. Tri-band wireless telephone
Również dla Motorola E398 series: Podręcznik użytkownika (31 strony), Arkusz danych (3 strony), Podręcznik użytkownika (29 strony), Podręcznik rozwiązywania problemów i debugowania (12 strony)

Level 1 and 2 Service Manual

Removing and Replacing the Rear Housing

6809480A37-O

Remove the battery cover, battery, as described in the procedures.

Using a Torx

driver with a T-6 bit, remove the 6 screws from the rear housing

(see Figure 7).

Carefully separate the rear housing from the front housing by starting at the

top and lifting the rear housing up and away from the front housing to remove.

Lift Rear Housing

Up and Off Front

Housing

Rear Housing

Figure 7. Removing and Replacing the Rear Housing

To replace, insert the bottom of the rear housing into the front housing and

gently press together.

Insert and torque the 6 screws to 2.6 in. pounds.

Replace the battery, and battery cover as described in the procedures.

Remove the battery cover, battery, and rear housing as described in the

procedures.

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent ESD and component damage.

Insert the flat end of the disassembly tool between the front housing and the

transceiver PC board as shown in Figure 8.

April 21, 2004

Screw Locations

Disassembly