Motorola GM600 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Radio Motorola GM600. Motorola GM600 11 stron. Remote mount kit
Również dla Motorola GM600: Instrukcja serwisowa (28 strony), Instrukcja instalacji (10 strony)

Drukuj stronę
Motorola GM600 Podręcznik użytkownika

Outgoing Calls

Outgoing Calls
The radio is capable of making a variety of calls
including calls to individual radios or group of radios.
The radio can select calls by using either the
Shortform Dial up/down scroll keys, the Select
Buttons A to D (if they are programmed to function
as a dedicated call button), or the Base Call Button.
When making a call note that the radio has a
maximum call duration timer. This appears on the
display, replacing the radio identity number.
The counter is bi-directional and when counting
down the radio displays the remaining call time. Ten
seconds before the radio returns to the IDLE state
the keyclick tone sounds. When counting up the
maximum duration of the call is determined by the
system. Please contact your network manager for
further information.

Shortform Dialling

When the radio is in the IDLE state shortform
dialling may be used. This allows quick access to
preprogrammed numbers using the shortform dial
up/down scroll keys. The radio scrolls through the
shortform dial list, the in-fleet unit numbers and then
the group unit numbers.
6
Outgoing Calls
English
On selecting the required number the call request is
sent by pressing the PTT. If the scroll keys are
pressed, but no call is preprogrammed, tone H
sounds and the display reverts to the IDLE state.

Dedicated Calls

The Base Call Button and the Select Buttons A to D
may be preprogrammed to make a dedicated call.
Press the Base Call Button or a Select Button for a
short period to make a call to a preprogrammed
number. The number is then displayed and the call
initiated to the requested number.

Last Number Redial

The last number called is stored in the memory of
the radio. For status calls only the called number is
stored, not the status message. This feature is
accessed by pressing the PTT from the IDLE state.