Motorola GM600 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Radio Motorola GM600. Motorola GM600 11 stron. Remote mount kit
Również dla Motorola GM600: Instrukcja serwisowa (28 strony), Instrukcja instalacji (10 strony)

Drukuj stronę

Special Calls

Non-Display Radios

When a call has been stored by a non-display radio,

LED B (above Select Button B) will ﬂash.

Press Select Button B to make a call to the oldest

entry in the stack. On a successful call set-up, the

entry is automatically deleted from the stack.

Unanswered calls may be deleted from the stack at

any time by pressing the Clear Button. LED B will

continue to ﬂash while unanswered calls remain in

the stack.

If Select Button B is pressed and there are no

entries in the stack, Tone H is sounded.

Call Diversion

Incoming speech calls or status calls can be

diverted either from your radio or from another radio.

Call Diversion/Cancellation is only possible if

programmed in the shortform dial list. Please

contact your network manager for further

information.

If a call is made to a radio whose calls are currently

being diverted, tone D will sound. A call will then

automatically be set up to the radio which is

receiving the diverted calls.

Special Calls

English

Talkgroup Select

Talkgroup Select only applies to display radios if

preprogrammed, please consult your network

manager.

If the user is a member of many talk groups, this

feature can be used to select one of the talk groups

only. This is particularly beneﬁcial if working at

different sites where each site has a different

talkgroup. In this case each site/talkgroup can be

tied to a 'channel' on the Shortform Dial Position

Selector. If Talkgroup Select is programmed into

your radio it is very likely that Last Number Re-Dial

will be disabled, in which case pressing the PTT will

make a call to the currently selected position of the

Shortform Dial Position Selector. Please consult

your network manager for more details.

Special Calls

The following calls are only available if

preprogrammed to function via the Base Call Button

or the Shortform Dial up/down scroll keys. They are

also available via the Select Buttons A to D if

programmed as additional dedicated calls.

Status Calls

A status is a code for transmitting prearranged

messages, e.g. status "05" may indicate "return to

base".