Dimastech Easy V3.0 Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt testowy Dimastech Easy V3.0. Dimastech Easy V3.0 10 stron.

ASSEMBLY DimasTech Easy V.3.0 - FLEX-FAN

- Align VC058 (9) to BT2501 (8)

and fasten with No.1 screw

VC047_M4x10 (21), as shown

in Figure 1

- Align FAN 120 (item not

included) to BT2501 (8) on

vertical holes and fasten with

No.2 screws VC050_M2,5x25

(22) plus No.2 knurled nuts

VC034_M2,5 (23), as shown in

figure 2

- It is possible to mount the FLEX-FAN

in any of the 6 holes with M4 threaded

inserts at your disposal according to

the motherboard you have purchased

or the preferred choice, as shown in

the figure beside. The image has the

sole purpose of illustrating the

possible positions of the parts.

Note: The number indicated in the

brackets indicates the corresponding

identification in the table on the page

No.2