Epson 7850p - PowerLite XGA LCD Projector Podręcznik z informacjami o produkcie - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik z informacjami o produkcie dla Oprogramowanie Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 25 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson 7850p - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Podręcznik użytkownika (12 strony), Części zamienne (1 strony), Instrukcja obsługi (47 strony), Biuletyn wsparcia produktu (30 strony), Instrukcja instalacji (5 strony), Szybka konfiguracja (2 strony), Broszura i specyfikacje (2 strony), Streszczenie techniczne (7 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Drukuj stronę
Epson 7850p - PowerLite XGA LCD Projector Podręcznik z informacjami o produkcie
EPSON PowerLite 7850p Projector
2. If you don't see your projector, check the following:
❏ Make sure your wireless signal is strong enough to
establish a connection (see your computer
documentation for details).
❏ Make sure your computer's SSID matches the ESSID
you assigned to the projector (for example,
). Remember that both the SSID and ESSID are
ROOM
case-sensitive. If you're using channel mode (Ad Hoc
mode only), make sure the channel set for the
computer matches that of the projector.
❏ If you're using Access Point mode, make sure the
projector and your computer are on the same subnet.
❏ Restart your computer and start NS Connection again.
❏ If you still don't see your projector and you are using
Access Point mode, follow the instructions in
"Connecting in IP Connect Mode" on page 16 to
connect to the projector manually.
3. Once the name of your projector appears, select it and click
. If more than one projector is listed, you can
Connect
select additional ones and connect to them at the same
time. If the selected projector is being used by another
person, you can still connect to it; doing so automatically
disconnects the other user.
4. If you are prompted for a keyword, enter the four-digit
number displayed on the EasyMP Network screen and click
.
OK
5. Once the connection is established, you see your
computer's image transmitted to the projection screen, and
a floating control bar:
16
EPSON PowerLite 7850p Projector
-
CONF
Click here to minimize
6/03
6. From the control bar, you can access these NS Connection
features:
Provides help using NS Connection.
Lists which projectors are available or in use.
Lets you access the projector's menu system
and the EasyMP menus from an HTML
browser window.
Lets you keep the projected image on the
screen, even if the image on your computer
or laptop changes.
Turns off the image and sound.
Lets you zoom in on a part of the image.
Lets you change the brightness, keystone
angle, contrast, color mode, and other basic
settings.
Lets you switch between the
S-Video
Lets you switch between the
DVI
ports.
Flashes three lights in sequence when the
computer and projector connection is active.
7. When done with your presentation, click
the control bar.
Connecting in IP Connect Mode
Even if your projector and computer are on a different subnet
(Access Point mode only) or connecting over different routers,
you can establish a connection manually using IP Connect
Mode.
1. Start NS Connection on the computer to which you want
to connect. You see this screen:
Video
,
BNC
, and
ports.
Computer
Disconnect
and
on