Philips VSS94705T Ważne uwagi - Strona 3

Przeglądaj online lub pobierz pdf Ważne uwagi dla Monitor Philips VSS94705T. Philips VSS94705T 7 stron. Colour observation monitor

Drukuj stronę

Connection and operation facilities

Colour Observation Monitor
1
2
3
4
5
Volume
1
Volume control for the audio signal.
Hue
2
Hue control
Remark: For the Europe version this control has no function.
Colour
3
Colour intensity control
Brightness
4
Brightness control
Contrast
5
Contrast control
System mode indication LED
6
The following modes are possible:
power on (LED is green)
•
power save mode (LED is red)
•
silent function (LED is amber)
•
alarm during power silent function (LED is red blinking)
•
Power save/active
7
Image and audio of the monitor on/off.
cable length
100m
0-50m
8
Cable length selector (cable length)
8
The value of this selector must be set to the length of the
system cable (0-300m max.) between the slave monitor
and system monitor.
6
7
CL 66610005_202.AI
11
slave
12
in
out
200m
video
13
I O
audio
in
14
300m
slaveaux
in
power
aux
9
10
CL 66610005_203.AI
Aux. in (aux. in)
9
Input for a third party camera or VCR (playback only).
Mains power switch (power)
10
Switches the slave monitor on/off.
Slave input (slave in)
11
This input has to be connected to the output of the
system monitor.
Remark: When the slave monitor is not connected to a system
monitor (stand alone) you can use this input to connect a
system camera.
Slave out (slave out)
12
Output for a second or third slave monitor.
Last in line switch (slave out 1/0)
13
Set the switch to 1 if another slave monitor is connected
to this output.
Input selection switch (in slave/aux)
14
With this switch you can select which input is displayed
on the monitor screen.

Installation

In this chapter the installation of the slave monitor is
described.
Caution: When (dis)connecting the slave monitor always
ensure that the slave monitor and system monitor are switched
off by means of the rear power switch. Only operating the
power save button is not sufficient.

Placement and connection

1 Place the slave monitor on a solid base (leave at least
3cm around each side of the monitor for ventilation).
3 cm
3 cm
Colour Observation Monitor
1
CL 66610005_204.AI
4