Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Instrukcje rozpakowywania i konfiguracji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcje rozpakowywania i konfiguracji dla Oprogramowanie Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 stron. Warranty statement
Również dla Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst: Broszura (1 strony), Pierwsze kroki (13 strony), Broszura i specyfikacje (8 strony), Instrukcja obsługi dla sieci (46 strony), Podręcznik (12 strony), Ograniczona gwarancja (12 strony)

Drukuj stronę

Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Instrukcje rozpakowywania i konfiguracji

1. Setting up the Printer

2. Assemble the left leg and left base in the same

way as step 1.

3. Insert the bottom horizontal strut into the

right and left bases as shown. Use the hex

wrench (G) to fasten the strut with collars (K)

and strut bolts (I).

Note:

After assembling the bases and bottom horizontal

strut, make sure that they are fastened tightly.

4. Insert the top horizontal strut into the right

and left legs. Use a screw driver to fasten the

strut with hex socket head bolts with washers

(J).

5. This completes assembly of the Stand. Make

sure each part of the Stand is tightened

securely.

Mounting the printer on the Stand

Caution:

Two or more people are required to mount the

printer. Hold the printer at the indicated

locations as shown. If the ink cartridges are

installed, do not tip the printer at an angle.

Otherwise, ink may leak from the cartridges.

1. Lock the two casters and extend the two

stabilizer knobs underneath the base unit.

Note:

Place the casters sideways and lock them so they

will not move.

2. Mount the printer on the printer mount as

shown.