Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 16

Yazılım Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 sayfaları. Warranty statement
Ayrıca Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst için: Broşür (1 sayfalar), Başlarken (13 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ağ Kılavuzu (46 sayfalar), Manuel (12 sayfalar), Sınırlı Garanti (12 sayfalar)

Sayfayı Yazdır

Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları

1. Setting up the Printer

2. Assemble the left leg and left base in the same

way as step 1.

3. Insert the bottom horizontal strut into the

right and left bases as shown. Use the hex

wrench (G) to fasten the strut with collars (K)

and strut bolts (I).

Note:

After assembling the bases and bottom horizontal

strut, make sure that they are fastened tightly.

4. Insert the top horizontal strut into the right

and left legs. Use a screw driver to fasten the

strut with hex socket head bolts with washers

(J).

5. This completes assembly of the Stand. Make

sure each part of the Stand is tightened

securely.

Mounting the printer on the Stand

Caution:

Two or more people are required to mount the

printer. Hold the printer at the indicated

locations as shown. If the ink cartridges are

installed, do not tip the printer at an angle.

Otherwise, ink may leak from the cartridges.

1. Lock the two casters and extend the two

stabilizer knobs underneath the base unit.

Note:

Place the casters sideways and lock them so they

will not move.

2. Mount the printer on the printer mount as

shown.