MSI MSI-8000HD Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor MSI MSI-8000HD. MSI MSI-8000HD 48 stron. Rf remote display

2.0

Operation

To turn on the power.

1. Press

POWER

version number will display.

The MSI-8000HD is ready for use.

Sets the zero reading of the Scale/Dyna-Link. Takes out small deviations in zero when

the Scale/Dyna-Link is unloaded. (See Section 2.3 for zeroing (Taring) package,

rigging or pallet weights)

1. Press

ZERO

zero function to work.

MSI-8000HD

The

Zero - Rules for Use:

• Works in GROSS or NET mode.

• Zeroing while in Net mode will zero the gross load causing the display to show

the negative Tare value.

• The Scale/Dyna-Link must be stable within the motion window. They will not

zero until the stable annunciator is on. The Scale/Dyna-Link will "remember"

that it has a zero request for two seconds. If motion clears in that time, they will

zero.

• The Scale/Dyna-Link will accept a zero setting over the full Range of the Scale/

Dyna-Link. Zero settings above 4% of full Scale/Dyna-Link will subtract from

the overall capacity of the Scale/Dyna-Link.

Example

If 100 lb is zeroed on a 1000 lb Scale/Dyna-Link, the overall capacity of the

Scale/Dyna-Link will reduce to 900 lb plus the allowed over-range amount.

, the LCD will show all segments for a display text and the software

. The load reading must be stable within the motion window for

stores the zero reading, and can restore it even if power fails.

Operation