Toshiba TDP-MT700 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-MT700. Toshiba TDP-MT700 34 stron. Home theater projector
Również dla Toshiba TDP-MT700: Instrukcja obsługi (36 strony), Instrukcja serwisowa (49 strony)

Drukuj stronę

English

Positioning your projector

Choosing a location

Your projector is designed to be installed in one of four possible installation locations:

Floor in front of screen (Standard);

Ceiling in front of screen (Ceiling);

Floor at rear of screen (Rear); or

Ceiling at rear of screen (Rear Ceiling).

Your room layout or personal preference will dictate which installation location you select. Take into

consideration the size and position of your screen, the location of a suitable power outlet, as well as

the location and distance between the projector and the rest of your equipment.

I. Floor in front of screen:

Select this location with the projector placed

near the floor in front of the screen. This is the

most common way to position the projector for

quick setup and portability.

III. Floor at rear of screen:

Select this location with the projector placed

near the floor behind the screen.

Note that a special rear projection screen is

required.

Set Rear in the Setup > Projection Mode menu

after you turn the projector on.

II. Ceiling in front of screen:

Select this location with the projector suspended

from the ceiling in front of the screen.

Purchase the Projector Ceiling Mounting Kit from

your dealer to mount your projector on the ceil-

ing.

Set Ceiling in the Setup > Projection Mode

menu after you turn the projector on.

IV. Ceiling at rear of screen:

Select this location with the projector suspended

from the ceiling behind the screen.

Note that a special rear projection screen and

the Projector Ceiling Mounting Kit are required

for this installation location.

Set Rear Ceiling in the Setup > Projection

Mode menu after you turn the projector on.

Positioning your projector