Aeon Labs Nano Shutter Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Aeon Labs Nano Shutter. Aeon Labs Nano Shutter 10 stron.

The Nano Shutter can be controlled via 2-state (flip/flop) external/manual switch, momentary push button or the 3-way

switch. To automatically detect and set the mode to the appropriate type of manual switch wired into Nano Shutter, toggle

the button on the manual switch once and wait 2 seconds for the Nano Shutter to detect the type of manual switch.

You can also set the external switch mode through Configuration Command Class.

Parameter 120 [1 byte] (for S1) and Parameter 121 [1 byte] (for S2) is the parameter that will set one of the 3 different

modes. You can set this configuration to:

(0) Unknown Mode

(1) 2-state switch mode

(2) 3-way switch mode

(3) Momentary push button Mode

(4) Enter auto switch detection mode

Compatible external switches and their use case.

Our Nano Shutter currently only supports 3 different external Wall Switches:

1. Standard Toggle Switch (2-way / 3-way / 4-way)

- Toggle UP (high voltage) - toggles On.

- Toggle DOWN (low voltage) - toggles Off.

2. Momentary Push Button

- Tap once - toggle On / Off.

- Press and Hold for 20 seconds or more - factory reset Nano Shutter.

3. WallSwipe for Nano

- Tap area - depending on the area you tap, you can toggle ON/OFF.

- Swipe up gesture - turn on lights.

- Swipe down gesture - turn off lights.