Pioneer DEH-1100MP Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-1100MP. Pioneer DEH-1100MP 24 stron. Cd rds receiver
Również dla Pioneer DEH-1100MP: Broszura (9 strony), Instrukcja instalacji (8 strony)

Drukuj stronę

Operating this unit

! The sampling frequency shown in the display

may be abbreviated.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen-

ing environment in all occupied seats.

Press AUDIO to select FAD.

Press a or b to adjust front/rear speak-

er balance.

FAD F15 to FAD R15 is displayed.

# FAD 0 is the proper setting when only two

speakers are used.

Press c or d to adjust left/right speaker

balance.

BAL L15 to BAL R15 is displayed.

# To return to the normal display, press BAND.

Using the equalizer

There are six stored equalizer settings such as

DYNAMIC, VOCAL, NATURAL, CUSTOM,

FLAT and POWERFUL that can easily be re-

called at any time.

! CUSTOM is an adjusted equalizer curve

that you create.

! When FLAT is selected no supplement or

correction is made to the sound.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

Press AUDIO to select BASS/MID/

TREBLE.

Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased

or decreased.

# To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

Press AUDIO to select LOUD.

Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press-

ing and holding EQ.

Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

! The AM volume level can also be adjusted

with source level adjustments.

Compare the FM volume level with the

level of the source you wish to adjust.

Press AUDIO to select SLA.

Press a or b to adjust the source vo-

lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press

BAND.

Section