Pioneer DEH-1100MP Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-1100MP. Pioneer DEH-1100MP 24 stron. Cd rds receiver
Również dla Pioneer DEH-1100MP: Broszura (9 strony), Instrukcja instalacji (8 strony)

Drukuj stronę

Section

Operating this unit

Other Functions

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

Press SOURCE and hold until the unit

turns off.

Press SOURCE and hold until function

name appears in the display.

Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

Clock—AUX (auxiliary input)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding

down SOURCE until the unit turns off.

Setting the clock

Use these instructions to set the clock.

Press FUNCTION to select clock.

Refer to Adjusting initial settings on this page.

Press c or d to select the segment of

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

Hour—Minute

Press a or b to put a clock right.

Turning the clock display on or off

You can turn the clock display on or off.

! Even when the sources are off, the clock

display appears on the display.

% Press CLOCK to turn the clock display

on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily

when you perform other operations, but the clock

display appears again after 25 seconds.

Switching the auxiliary setting

It is possible to use auxiliary device with this

unit. Activate the auxiliary setting when using

auxiliary device connected to this unit.

Press FUNCTION to select AUX.

Refer to Adjusting initial settings on this page.

Press a or b to turn the auxiliary set-

ting on or off.

Using the AUX source

% Insert the stereo mini plug into the

input jack on this unit.

Selecting AUX as the source

% Press SOURCE to select AUX as the

source.