Pioneer DEH-2910MP Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-2910MP. Pioneer DEH-2910MP 42 stron. Cd rds receiver

Drukuj stronę

Operating this unit

7 RPT indicator

Shows when repeat play is turned on.

8 LOUD indicator

Appears in the display when loudness is

turned on.

9 Stereo (5) indicator

Shows when the selected frequency is

being broadcast in stereo.

a LOC indicator

Shows when local seek tuning is on.

Basic Operations

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to page 10).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Tuner—Built-in CD player—AUX

Notes

! In the following cases, the sound source will

not change:

— When there is no disc in the unit.

— When the AUX (auxiliary input) is set to off

(refer to page 14).

! AUX is set to on by default. Turn off the AUX

when not in use (refer to Switching the auxili-

ary setting on page 14).

! When this unit's blue/white lead is connected

to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when

this unit's source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Tuner

Listening to the radio

Press SOURCE to select the tuner.

Press BAND to select a band.

Press BAND until the desired band (F1, F2 for

FM or MW/LW) is displayed.

To perform manual tuning, briefly press

c or d.

To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the button.

Storing and recalling broadcast

frequencies

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 12 FM stations, 6 for each of the two FM

bands, and 6 MW/LW stations can be stored in

memory.

# Press a or b to recall radio station frequen-

cies.

Section