Pioneer DEH-2910MP Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-2910MP. Pioneer DEH-2910MP 42 stron. Cd rds receiver

Drukuj stronę

Operating this unit

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station's AF list. (This is only

available when using presets on the F1 or F2

bands.) No preset number appears on the dis-

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the tuner can't find a suitable station, or re-

ception status becomes bad, the unit will auto-

matically search for a different station with a

same programming. During the search,

PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 14.

Limiting stations to regional

programming

When AF is used, the regional function limits

the selection of stations broadcasting regional

programs.

Press FUNCTION to select REG.

Press a or b to turn the regional func-

tion on or off.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear from the

display if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other network's TP station (a station

carrying information which cross-references

TP stations).

Tune in a TP or enhanced other net-

work's TP station.

TP indicator will light.

Press TA to turn traffic announcement

standby on.

# To turn traffic announcements standby off,

press TA again.

Use VOLUME to adjust the TA volume

when a traffic announcement begins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

Press TA while a traffic announcement

is being received to cancel the announce-

ment.

The tuner returns to the original source but re-

mains in the standby mode until TA is pressed

again.

# You can also cancel the announcement by

pressing SOURCE, BAND, a, b, c or d while a

traffic announcement is being received.

Notes

! You can also turn the TA function on or off in

the menu that appears with the pressing of

FUNCTION.

Section