Pioneer VSX-D704S Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-D704S. Pioneer VSX-D704S 40 stron. Audio/video stereo receiver

Drukuj stronę

OPERATING THE TUNER

Press the POWER switch to the ON position.

Select TUNER with the input selector.

Be sure to turn the TAPE 2 MONITOR button OFF when

listening to AM or FM broadcasts.

Switch

ON the SPEAKERS button

corresponding

to the

speakers you wish to use.

FM auto stereo

reception

and monaural

reception

Each time you press the MPX MODE button, the MONO

indicator in the display section lights or goes out.

• If an FM stereo broadcast is received when the MONO

indicator is out, the STEREO indicator lights, and sound is

in stereo.

• If an FM stereo broadcast is received when the MONO

indicator

is lit, the sound will be monaural.

If there is

interference during stereo mode reception, switch to mono.

The sound will become monaural but interference will be

reduced.

ITUNING

INTO STATIONS

Turn the MULTI-JOG,

and the tuning frequency

changes.

(Switch off when the GUI MODE button is on.)

Turning in a clockwise direction raises the frequency, while

turning in a counter-clockwise

direction lowers the frequency.

oooooooo o

1. Use the FM/AM

button to select either FM or AM.

When the "ST CALL" indicator is lit in the display, press

the SELECT button to switch it off.

2. Turn the MULTI-JOG until you reach the frequency of

a desired station.

When a station is received, the TUNED indicator will light up.

NOTE:

The TUNED indicator may not light with broadcasts received

over

long distances, or when the broadcast signals are extremely

weak.

Adjust

the volume

and tone as desired.

Auto tuning

Auto tuning is convenient when you do not remember the

frequency

of a desired station, or when you wish to find

stations that you do not normally listen to.

Operate by remote control. (Refer to page 27.)

You can also perform Auto Tuning using GUI. (Refer to page

29.)