Pioneer VSX-D704S Manual de Instruções - Página 18
Procurar online ou descarregar pdf Manual de Instruções para Recetor estéreo Pioneer VSX-D704S. Pioneer VSX-D704S 40 páginas. Audio/video stereo receiver
Imprimir página
OPERATING THE TUNER
Press the POWER switch to the ON position.
Select TUNER with the input selector.
Be sure to turn the TAPE 2 MONITOR button OFF when
listening to AM or FM broadcasts.
Switch
ON the SPEAKERS button
corresponding
to the
speakers you wish to use.
FM auto stereo
reception
and monaural
reception
Each time you press the MPX MODE button, the MONO
indicator in the display section lights or goes out.
• If an FM stereo broadcast is received when the MONO
indicator is out, the STEREO indicator lights, and sound is
in stereo.
• If an FM stereo broadcast is received when the MONO
indicator
is lit, the sound will be monaural.
If there is
interference during stereo mode reception, switch to mono.
The sound will become monaural but interference will be
reduced.
ITUNING
INTO STATIONS
Turn the MULTI-JOG,
and the tuning frequency
changes.
(Switch off when the GUI MODE button is on.)
Turning in a clockwise direction raises the frequency, while
turning in a counter-clockwise
direction lowers the frequency.
1
2
3
oooooooo o
6
1. Use the FM/AM
button to select either FM or AM.
When the "ST CALL" indicator is lit in the display, press
the SELECT button to switch it off.
2. Turn the MULTI-JOG until you reach the frequency of
a desired station.
When a station is received, the TUNED indicator will light up.
NOTE:
The TUNED indicator may not light with broadcasts received
over
long distances, or when the broadcast signals are extremely
weak.
3.
Adjust
the volume
and tone as desired.
Auto tuning
Auto tuning is convenient when you do not remember the
frequency
of a desired station, or when you wish to find
stations that you do not normally listen to.
Operate by remote control. (Refer to page 27.)
You can also perform Auto Tuning using GUI. (Refer to page
29.)
18
<ARB7035>