Pioneer A-302 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer A-302. Pioneer A-302 13 stron.

Drukuj stronę

OPERATIONS

COPYING TAPES

When two decks are used, you can record the sounds from one deck

onto the other.

Application examples:

——

cocoon

@ To edit a recording of an FM broadcast in order to cut out unwanted

commercials, recording only desired material onto another tape.

When using two cassette decks

1. Load tapes for playback (pre-recorded tape) and

recording

(blank

tape)

into

the

respective

cassette decks.

2. Select the copying direction with REC SELECTOR

switch.

e When copying from the cassette deck of TAPE 1/DAT terminals

to the cassette deck of TAPE 2 terminals: Set to 1 > 2.

@ When copying from the cassette deck of TAPE 2 terminals to the

cassette deck of TAPE 1/DAT terminals: Set to 2 > 1.

NOTE:

The tape input selected with REC SELECTOR switch can be copied,

TAPE 2

regardless of the settings of INPUT SELECTOR and DIRECT switches.

eel

3. Operate the cassette decks to begin copying.

Set the cassette deck with the pre-recorded tape to the playback

mode. Set the cassette deck with the blank tape to the recording

mode, and set the cassette deck with the pre-recorded tape to the

playback mode.

Playback using a graphic equalizer

The sound

of all sources

can be finely adjusted with a graphic

equalizer connected to ADAPTOR terminals.

However, the graphic equalizer is bypassed when DIRECT switch is on.

NOTE:

Be sure to perform this operation with the adaptor component power

switch

in the on position.

Even

when

not using the adaptor

component,

its power

switch

must

be left on.

If the adaptor

component

is switched off, no sound

will be produced,

or the

playback sound will be distorted.