Pioneer C-90S Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer C-90S. Pioneer C-90S 32 stron. Stereo control amplifier

Drukuj stronę

IMPORTANT

The lightning flash with arrowhead, within an equi-

lateral tiangie, is intended to alert the user of the

presence of uninsulated "dangerous voltage" within

the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons

IMPORTANT 2

if the apparatus is fitted with AC mains power out-

lei(e). see REAR PANEL FACILITIES for convenient

connection of additional Hi-Fi component(s). Make

all connections to the AC outlet(s) and the signal

terminals first, Connect the plug to the wall socket

last, make sure that the power switch is off

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK,

NOT

REMOVE

COVER

(OR

BACK}.

USER-SERVICEABLE

PARTS

INSIDE.

REFER

SERVICING

QUALIFIED

SERVICE

PERSONNEL.

FOR USE IN THE UNITED

KINGDOM

The wires in this marns lead are coloured in accor-

dance with the following code:

Blue

Neutral

Brown:

Live

READ

INSTRUCTIONS — Alt

the

safety

and

operating instructions should be read before the

appliance is operated

RETAIN INSTRUCTIONS

-~ The operating instruc:

tions should be retained for future reference.

HEED WARNING ~- All warnings on the apphance

and in the operating

instructions

should

adhered to.

FOLLOW INSTRUCTIONS — All operating and use

instructions should be followed.

WATER AND MOISTURE — The appliance should

not be used near water

—

for example,

near a

bathtub, washbowt, kitchen sink. laundry tub, in

wet basement, of near a swimming pool, etc

LOCATION -— The appliance should be installed in a

stable location

WALL OR CEILING MOUNTING — The appliance

should mot be mounted to a wall or ceiling

VENTILATION -- The appliance should be situated

80 that its location or position does not interfere

with its proper ventilation. For example, the ap-

pliance shauid not be situated on a bed, sofa, rug,

or similar surface that may block the ventilation

openings: ar, placed in a built-in installation, such

as 3 bookcase or cabinet that may impede the

flow of air through the ventilation openings

HEAT — The appliance should be situated away from

heat sources such as radiators, heat registers,

stoves, ot other appliances (including amplifiers)

that produce heat

POWER

SOURCES —The appliance should be

connected to a power supply only of the type

described

in the operating

instructions

of as

marked on the appliance.

POWER-CORD

PROTECTION -- Power-supply

cords should be routed so that they are not likely

to be walked on or pinched by items placed upon

'ot against them, paying particular attention to

cords at plugs, convenience receptacies. and the

point where they exit from the appliance

POLARIZATION — ff your

purchased

product

provided with a polarized power plug. please read

the following

instructions.

This product

equipped with a polarized alternating current line

plug {a plug having one blade wider than the

other). This plug will fit unto the power outlet only

SAFETY INSTRUCTIONS

POWER LINES — An outdoor antenna should be

located away from power fines

NONUSE

PERIODS —The power cord of the

appliance should be unplugged from the outlet

when left unused for a long period of time

OBJECT AND LIQUID ENTRY — Care should be

taken so that objects do not fail and liquids are

not spilled into the enclosure through openings.

DAMAGE REQUIRING SERVICE — The anpliance

should be serviced by a Pioneer authorized ser-

vice center or qualified service personne! when

The power-supply cord or the plug has been

damaged: or

Objects have fallen, or liquid has been spilled into

the appliance; or

The apptiance has been exposed to rain: ot

The apptiance does not appear to operate nor-

mally or exhibits a marked change in perfor.

mance; or

The appliance has been dropped: or the enclosure

damaged

SERVICING —The user should not attempt to

service the appliance beyond that described in the

operating instructions. For alt other servicing,

contact the nearest Pioneer authorized service

center.

POWER LINES.

SERVICE

ENTRANCE

CONDUCTORS,

GROUND WIRE ab

The exciamation point within an equilateral triangle is

intended to alert the user of the presence of important

operating and maintenance (servicing) instructions in

the litereture accompanying the appliance.

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

marking identifying the terminals in your plug proceed

as follows:

The wire which is coloured blue must be connected to

the terminal which is marked with the letter N or

coloured bleck

The wire which is coloured brown must be connected

to the terminal which is marked with the letter & or

coloured red.

Equipment sold in the U.K. is not supplied with

2 power piug

OUTDOOR ANTENNA GROUNDING — if an out~

side antenna is connected to the antenna termi-

nat, be sure the antenna system is grounded so as

10 provide some protection against voltage surges.

and built up static charges.

in the U.S.A. section 810 of the National Elec-

trical Code. ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of

the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size

of grounding conductors, tocation of antenns-

discharge unit, connection to grounding elec-

todes, and requirements for the grounding elec

trode. See Fig A

Use No 10 AWG (5.3 mm?) cop-

per, No 8 AWG (8.4 mm*) alu-

minum. No. 17 AWG (1.0 mm?)

copperciad steel, bronze wire.

larget as ground wire

Secure

antenna

fead-in

and

ground

wires

house

with

stand-off insulators spaced

tram.

4 feet

(1.22

meters)

to 6 feet

(1.83 meters} apart

c} Mount antenna discharge unit as

closely as possible to where lead-

wn enters house

STAND-OFE

Use jumper wire not smatier than

INSULATORS

Noe AWG (13.3 mm*) copper,

or the equivalent, when a sepa-

rate antenna-grounding electrode

is used

See NEC Section 810-21 {j)

ANTENNA

LEAD IN WIRE

TO EXTERNAL ANTENNA

TERMINALS OF PRODUCT

ANTENNA

one way. This is a safety feature. Hl you are unable

ce ewraance

gAouNe

OCRANGE UNIT ¢

1o insert the plug fully inte the outlet, ty reversing

Eguipaaent

eaOUNE.

the plug. Hf the plug should still fait 10 fit, contact

WIRE a,b

your electrician to teptace your obsolete outtet

Do not defeat the safety purpose of the polarized

;

'cRGUND

plug

POWER SERVICE

CLEANING —- The appliance should be cleaned only

GROUNDING ELECTRODE SYSTER

with 2 polishing cloth or a soft dry cloth. Never

clean with furniture wax, benzine, ingecticides or

ots

other volatile hquids since they may conede the

amma

cabinet

FIG.A

LOCAL CODES SEE

'BNET SECTION 830.23 (1)

PS CLAMPS

7 OPTIONAL ANTENNA

GROUNDING ELECTRODE

DRIVEN & FEET (2.44 m)