Aeotec Water Sensor 7 Pro Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Aeotec Water Sensor 7 Pro. Aeotec Water Sensor 7 Pro 14 stron. Water sensor
Również dla Aeotec Water Sensor 7 Pro: Podręcznik (3 strony), Skrócona instrukcja obsługi (8 strony), Podręcznik użytkownika (9 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (9 strony)
Drukuj stronę
Tilt
0x0B
4.10 CENTRAL SCENE
When activated by configuration parameter #14 the device can perform as a scene controller. Digital + VCC is used to
connect the scene button. The external dry contact will then act as a scene controller with a total of 7 scenes that can
be activated:
• 1 - Contact Pressed 1 time
• 2 - Contact Pressed 2 time
• 3 - Contact Pressed 3 time
• 4 - Contact Pressed 4 time
• 5 - Contact Pressed 5 time
• 6 - Contact held down
• 7 - Contact released
Slow Refresh = 0, A new Key Held Down notification will be sent every 200ms until the key is released.
4.11 Wake Up
Parameter
Min Wake Up Interval Seconds
Max Wake Up Interval Seconds
Default Wake Up Interval Seconds
Wake Up Interval Step Seconds
4.12 Battery
The 2.90V or more battery voltage corresponds to 100% battery level, and 2. 60V or less corresponds to 0%.
1.
If send Battery Get to the device, it will issue Battery Report with battery level to the requester when waked up.
2.
If waked up or power on, it will detect battery level, and issue Battery Report 0xFF via Lifeline when battery level is
3.
less than the value of configuration parameter 23 .
If the battery level is less than the value of configuration parameter 23 , LED will flash red 3 times for each waked up .
4.
4.13 Indicator
Indicator ID
Node Identify
(Green Led)
AEOTEC User Manual
0x00 / 0xFF
Value
0x000E10
0xEFF100
0x093A80
0x0000F0
Property ID
0x50
On Off Period
On Off Cycles
On time within an On/Off period
tilt event
Page 10
Time
3600s [1 hour]
15724800s
604800s [1 week]
240s [4 minutes]
0x03
0x04
0x05