Whirlpool 3LCHW9100WQ0 Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Spryskiwacz Whirlpool 3LCHW9100WQ0. Whirlpool 3LCHW9100WQ0 48 stron. Semi-pro front-load washer
Drukuj stronę
The washer canbeinstalled using thestandpipe drain system
(floor o rwall), thelaundry tubdrain system, orthefloordrain
system. Select thedrain hose installation method youneed.
See "Tools a ndParts."
Standpipe
drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of
50 mm (2"). The minimum carry-away capacity can be no less
than 45.5 L (12 gal.) per minute.
The top of the standpipe must be at least 762 mm (30") high and
no higher than 2.4 m (96") from the bottom of the washer.
(30" rain.]
B
Laundry tub drain system (view C)
The laundry tub needs a minimum 76 L (20 gal.) capacity. The top
of the laundry tub must be at least 762 mm (30") above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that may be
purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 710 mm (28") from the
bottom of the washer. Additional hoses might be needed.
710 mm
(28"
C
D
Electric Shock Hazard
Plug into an earthed socket outlet.
Do not use an adapter,
Do not use an extension cord,
Failure to fol(ow these instructions can result in death,
fire, or electric
shock.
•
A 220-240V, 50 Hz., fused electrical supply is required. A
time-delay 10-16A fuse or circuit breaker is recommended.
•
This washer is equipped with a power supply cord having an
earthed plug.
•
To minimize possible shock hazard, the cord must be
plugged into an earthed socket outlet, earthed in accordance
with local codes and ordinances.
If a mating outlet is not
available, it is the personal responsibility
and obligation of the
customer to have the properly earthed outlet installed by a
qualified electrician.
•
If codes permit and a separate earth wire is used, it is
recommended
that a qualified electrician determine that the
earth path is adequate.
•
If the supply cord is damaged, it must be replaced by the
manufacturer,
its service agent, or a qualified person to avoid
a hazard.
•
Do not earth to a gas pipe.
•
Check with a qualified electrician if you are not sure the
washer is properly earthed.
•
Do not have a fuse in the neutral or earth circuit.
EARTHING
INSTRUCTIONS
This washer must be earthed. In the event of a malfunction
or breakdown,
earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing
conductor
and an earthing plug. The
plug must be plugged into an appropriate
outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING:
improper connection of the equipment-
earthing conductor
can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance - if it
will not fit the outlet, have a proper outlet installed by a
qualified electrician.
6