Whirlpool 3396311 Instrukcja obsługi i konserwacji - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool 3396311. Whirlpool 3396311 23 stron. Whirlpool electric and gas drvers use and care 3396311

Drukuj stronę

PROBLEM

CHECK IF

Shrlnklng

Items are overdried

C IAUSE~~LUTI~NS

Remove ittlms while there is still a trace

of moisture. Some items should be

removed w bile damp, then shaped and air

dried.

Slow drying

Fabric type and quality is

suitable for drying

There is a large amount of

moisture in the load to be

dried

Some knits are stretched during manufac-

turing. Washing and drying returns them

to the original size. This is normal. Check

quality of g arment before buying. Follow

fabric care label directions carefully.

Some item!;; hold more moisture than

others (cotlons more than polyester).

They take I :)nger to dry. Full loads take

longer to dr!r than small loads of the same

fabric.

Cold rinse water is used

A load rinslt~d in cold water will take

slightly lon!;ier to dry than a warm one.

Cold rinses, however, help save energy

and reduce wrinkling more than warm

rinses do.

Room air temperature is

below 45°F (7°C)

Install dryer in a room where the air

temperatun

is warmer than 45OF (7°C).

Cold air inc eases drying time and may

cause wrinC les not to be removed.

Dryer is exhausted according

to Installation Instructions

Lint screen is clogged

Install and t lxhaust your dryer according

to the Installation Instructions provided.

Clean lint .s::reen before or after

each use.

Exhaust duct or outside

exhaust hood is clogged

Proper electrical supply is

used

Clean if net+ded.

Properly col'lnect the dryer to a grounded

electrical circuit that meets the electrical

requiremenis stated in the Installation

Instructions

Static

electrktty

Load is overdried

Fabric soflener is used

Remove itelns while there is still a trace

of moisture.

Use a fabric: softener and follow package

directions c: Irefully.

Synthetics, synthetic blends,

permanent press and knits are

Synthetics, ilynthetic blends, permanent

press and khlts build up static electricity.

in load

Use a fabric softener and be careful not to

overdry the load.