Whirlpool WVW51UC0FS Instrukcje instalacji oraz instrukcja obsługi i konserwacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcje instalacji oraz instrukcja obsługi i konserwacji dla Okap wentylacyjny Whirlpool WVW51UC0FS. Whirlpool WVW51UC0FS 9 stron. Wall‑mount canopy range hood
Również dla Whirlpool WVW51UC0FS: Instrukcje instalacji oraz instrukcja obsługi i konserwacji (28 strony), Instrukcje instalacji; Informacje dotyczące użytkowania i pielęgnacji (28 strony)

2. Secure the bottom of the duct with (2) 4.2 x 8 mm screws.

The range hood is designed to remove smoke, cooking

vapors, and odors from the cooktop area. For best results,

start the hood before cooking, and allow it to operate several

minutes after the cooking is complete to clear all smoke and

odors from the kitchen.

The hood controls are located on the front side of the canopy.

A. Duct cover holes

B. Duct cover

C. Control panel

D. Glass canopy

E. Grease filter

F. LED lights

G. Grease filter release handle

Complete Installation

1. For non-vented (recirculating) installations only, install

charcoal filters over metal grease filter. See the "Range

Hood Care" section.

2. Install metal filters. See the "Range Hood Care" section.

3. Check the operation of the range hood blower and light.

See the "Range Hood Use" section.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.

A. Blower speed maximum button

B. Blower speed medium button

C. Blower speed minimum button

D. Blower off button

E. On/Off light button

Operating the light

The On/Off light button controls both lights. Press once

for On and again for Off.

Operating the blower

The Blower Speed buttons turn the blower on and control the

blower speed and sound level for quiet operation. The speed

can be changed anytime during fan operation by pressing the

desired Blower Speed button.

The Blower Off button turns the blower off.