AER Lily one Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do instrumentów muzycznych AER Lily one. AER Lily one 12 stron. Twin source rechargeable pick up system for acoustic instruments
Również dla AER Lily one: Szybki start (3 strony)
Drukuj stronęNow add microphone signal by turning
the Mic control. Tapping the top will let
you hear the microphone signal very
easily. Sounds good?
•
Continue with the next step.
Bear in mind:
The Lily one system is not made for
‚microphone-only' performance! The
microphone will add definition and
authenticity as well as an acoustic
ambience, which makes the sound more
natural. Too much microphone signal will
make the tone ‚hollow' and can cause
feedback. The piezo at full volume may
make microphone use impractical.
If you can hear both signals loud and
clear you can fix the cable with the cable
clamps.
6. Soundhole
Final assembling
Depending upon the construction of the
instrument, you may find it necessary to
use different materials to underlay or pad
the soundhole control. First dry-fit the
control unit to determine the position.
If adhesive tape is used, make sure to
degrease both surfaces. Position the SHC
where you can reach it easily and fix the
cable in a safe position. With the instru-
ment in playing position, the left pot (in
the direction of the bridge) should be
the master volume, the left pot (in
the direction of the neck) adds the
microphone signal.